Facebook LinkedIn

Kistler-Morse Products

Suitable for almost all types of vessels, Kistler-Morse products include bolt-on strain gauges, load and tension cells, as well as load stands, and more. We have access to the full range and can supply or supply and fit across the whole of the UK.


Products > Kistler-Morse Products

MICROCELL® BOLT-ON SENSOR

The Microcell is an easy to install bolt on strain gauge sensor that produces an electrical output proportional to the changes in weight of a vessel. An empty vessel is not required for installation or calibration. This allows for increased up-time. No special tools are required for installation Immune to material characteristics like angle of […]

LOAD DISC II LOAD CELL

The LDII load cell has the lowest profile for its load ranges in the industry, and uses the proven KM semiconductor strain gauge technology to continuously measure the weight of material for in-process inventory and bulk storage vessels. Suitable for use with mixing and blending vessels, surge hoppers, and vessels with agitators Standard load ranges […]

LD3XI/LD3XIC™ LOAD CELL

Available with a cage (LD3xiC) or stand-alone (LD3xi), these load cells provide higher accuracies and are best used for in-process applications with smaller capacities. Constructed of 17-4 Stainless steel, heat treated to PH900 for a strong, low profile load cell IP68 Rated for water resistance Sensors can be replaced without modification to the tank

TC1 & TC2 TENSION CELL

NEW! Expanded Capacities – Now up to 110,000 lbs (50,000 kg) capacity Designed for industrial inventory management and process applications; construction is alloy steel with nickel plate for corrosion resistance. No moving parts to wear out or fall out of adjustment Fully sealed IP67, waterproof for outdoor and indoor applications TC1 models are NTEP Certified […]

LD360S™ LOAD CELL

Simple, self-contained design virtually eliminates bacteria hiding places and withstands rigorous CIP cleaning practices. Standard load ranges are from 1,000 lb (453 kg) to 25,000 lb (11340 kg) per support Easy to install with a single footprint and height dimension Minimal deflection reduces plumbing effects for better system accuracy Optional hardware with built-in leveling features […]

LD3™ COMPRESSION LOAD CELL

The robust and versatile LD3 weight sensor is installed under a load bearing support. This load cell compensates for changes in output due to the natural movement of a vessel. Mechanically secure by being bolted together rather than having floating mounting hardware Mounting hardware options attach to different types of tanks; including horizontal tanks Allows […]

L-CELL® BOLT-ON SENSOR

The L-Cell sensor bolts directly to a vessel’s support structure and measures changes in stress of the support, converting a voltage output into a readable weight. Easy to install – an empty vessel is not required for installation or calibration, this increases up-time. No special tools are required. Ideal bolt-on solution for skirted silos of […]

LOAD STAND® II DIRECT SUPPORT

The load stand is a direct vessel-to-foundation structural member designed to be a dependable and accurate continuous monitoring and control solution for inventory management. Rated load capacity can be up to one million pounds per support point Manufactured to meet IBC (International Building Code) requirements Immune to material characteristics like angle of repose, rat-holing, bridging, […]